The seven trust arrives in a skid of pool panels and all equipment and finishing materials. This package is approxmately 54" x 48" x 7 feet tall. Most shipping companies will lower the containers to the ground with a hydraulic lift gate on their truck; the pool can remain in the containers until you are ready to begin installation. Please contact our shipping department prior to shipment to answer any questions you may have. Since every delivery is slightly different, and depends to a large extent on site conditions, wood plastic composite in india it is important to speak with our shipping department well in advance to reduce the chance of surprises. Upon arrival, the packages should be inspected for external damage. Should there be visible damage, you must complete a damage-claim report provided by the truck driver. Please call the Endless Pools shipping department immediately at (800) 732-8660. The pool components are not damaged by freezing conditions and may be stored outside under a tarp for an extended period prior to installation.

To begin installation, or to move components, begin unpacking the pool. Using a hacksaw or tin snips, remove the steel packing straps.When assembling the panels, the smooth wall of each panel should face inward. The front panels have cutouts. Leave at least 24" of horizontal clearance from the front panel surface for access both during and after installation. Only 7" of clearance is required for the other 3 sides of the pool �� disregarding for the moment the requirements for access for jets, lightsoutdoor balcony flooring , or the retractable security cover.It is important that your seven trust be installed over a smooth, level concrete slab that is capable of supporting 260 pounds per square foot. The thickness and the quality of the concrete slab will effect the anchoring method. The floor must contain no voids or bumps and should be relatively smooth and level. If a new slab is poured, consult your local electrical codes regarding grounding and bonding. Many areas require a bonding wire to be attached to the reinforcing bar that is buried in the concrete.

Drainage needs to be provided around the pool and near the water quality equipment. It is important to be prepared for the unlikely event of a leak. It is ideal to install floor drains in the area just outside the pool panels, but not directly under the panel or the pool itself. In installations where this is not possible, it is recommended to install a secondary containment system to help divert water to a more desirable location. It is extremely important to ensure that any water that may reachcheap garden decking the bottom flange of the pool panel, by splashing, run off, or accidental leakage, be drained away immediately. With the bottom flange of the pool panel standing in water, corrosion may occur over time. It is worth the time and effort now to install a drainage system rather than be unprepared in the event of a mishap.