1. flooring, floors, walls, wall base to keep them dry.
2. The ground should be flat.
3. The use of the keel and the liner is subjected to a drying, moisture content should not exceed local equilibrium moisture content.
4 keel flat to flat.
5. Before laying the ground floor is best lay a layer of plastic film.
6. The moisture content of wood to ensure that the standard range, do not exceed the local equilibrium moisture content.
7. For the manufacturers concerned, to scientific selection of the floor with trees, are not suitable to do the floor of species must not be used.
8. Because different species, physical, chemical and mechanical properties of wood are different, so the plant should be carried out tests in the selection of paint. Confirm paint the wood species adaptability, scientific selection of paint, to ensure paint satisfy performance.
9. wood flooring, between the floor and wall of the base,wpc wood plastic composite material sufficient expansion joints, etc. according to the size of rooms.
10. The process of laying on the floor, try not to use water-soluble adhesive, to avoid the floor to absorb moisture building a roof over a deck;
11 can not be sure when the keel keel fixed with cement.
12. Do not be too dry indoor environment, and do not be too wet, especially in the north of the winter, try to maintain a certain indoor humidity, to prevent the wooden floor cracked, deformed.
13. When cleaning the floor, try not to use Tuoshi cleaning the floor with dripping.
14. Avoid the floor in strong sunlight exposure to prevent floor discoloration, deformation, cracking.