More care and want to extend the life of the floor. However,advantages plastic decking material due to the different manufacturing processes are not the same floor, if the home shop wood floor surface must always want to keep bright as new, comfortable and beautiful. There lacquer wood flooring and solid wood floor wax oil points to determine the curing method is not exactly the same, in addition to defacement of different levels of conservation also determines the way different.

The first step: clean, use a vacuum cleaner to clean, daily cleaning. After then a soft cloth moistened with special detergents or soap flakes dilution for cleaning. For cleaning large areas, calculator for vinyl railing can be used sprayers or rotary cleaning machine. For lacquer wood floors, water it does not do any good to try to reduce excess water cleaning, be sure to scrub rag wrung. The solid wood floor wax oil to remove the black rubber grinding marks and other dirty water can not be removed with a soft cloth dampened with a low concentration of alcohol wipe or a little white wine. Step Two: Conservation should be coated with a layer of floor polish diluted.

If the floor is relatively frequent usage, lacquer wood floor after floor clean. It may be appropriate to increase the concentration of polish. Under normal circumstances can conserve the living room once a month, cost of armour guard decking and frequented the kitchen, living room and other maintenance is required per week. The third step: stain lacquer wood flooring wood floor wax or oil will have dirt difficult to remove by conventional cleaning methods, after a long period of use. Different cases have different solutions.

You can use a degreasing agent and warm water of 25 �� mixed lacquer wood floors because a lot of the local board of fouling becomes difficult to clean. Before using a degreasing agent,outside railings for steps floor should be fully cleaned. For too severe fouling on the floor, solid wood flooring should look polished off, and then re-painted, but this method should be a last resort because the polished floor must make thinner.