Ultrasonic cell crusher beautiful appearance, reliable in performance. Instrument USES the large screen display, the central computer centralized control, ultrasonic time and power set arbitrary, sample temperature detection display of microcomputer, frequency tracking, automatic fault alarm. All functions are displayed in the LCD screen.


Ultrasonic cell crusher adopts the automatic and manual ultrasonic sonochemistry machine foot (or selected) working mode; The precision of ultrasonic power can be 1% continuous adjustable; Transducer is small in size, light weight, can do trace sample in your hands, also can do it on the mounting bracket.


Ultrasonic cell crusher is made up of frame, vibration table, bowl and the material of bowl clamping device. Organizations, equipped with a motor drives the eccentric shook vibration table. Shaking table is equipped with a bowl, bowl with hammer rings, each a piece, are all made from manganese steel. Material is sealed by compressive bar pressure. When sample preparation the release lever, will wash bowl off cleaned, and then put feeding bowl the processing of the sample space, cover the pot cover, pressure lever. Open power supply, make the material of bowl strike ring blocks and collisions make material sample pieces, general grinding time about 2 min, turn the power off, stay slewing stationary, take out the material sample, in addition to iron bagging.


Ultrasonic cell crusher is a kind of strong use of ultrasonic ultrasonic cutting machine cavitation effect in liquid, ultrasonic treatment was carried out on the material of multifunctional and multipurpose instrument, can be used for a variety of animal and plant cells, viruses, and broken, at the same time can be used to emulsify, separation, homogenization, extraction, defoaming, cleaning and accelerate the chemical reaction and so on. Is widely used in biochemistry, microbiology, drug chemistry, surface chemistry, physics, zoology, etc.


Use ultrasonic cell crusher the note as follows:


1, To protect the set point temperature must be higher than room ultrasonic dispersion machine temperature or sample temperature 5 ℃ or more. When the temperature protection according to the SET health more than 4 seconds, resetting protection value. SET the right temperature can also press SET key more than 4 seconds to reset.


2, It is strictly prohibited within the amplitude is not inserted into the liquid (no-load) boot, otherwise it will damage the transducer or ultrasonic generator.


3, For a variety of levels of cell disruption, length, size, power to users according to different cells to grope, select zui better value. This instrument output power is larger, if choose Ф 2, 3 or 6 when the amplitude Ф Ф, should turn power drive too, so as not to overload the amplitude and fracture.